Build Your Own Pc how to build a computer

Jimmy/ December 30, 2022/ how to build a computer

I would also recommend a test fire of the stem outside of the case before placing then in the tower to make sure they work properly. Nothing more aggravating then to put a computer together to figure out your compilers are not working. Anti-stati work space and an esd wriststrap is a good idea as well. There is more and more that could be said, much that is personal opinion.

  • To prevent unwanted damage from ESD , use a surface that isn’t metal– preferably, a wood or a glass surface.
  • First, we need to test that the machine is actually running as intended.
  • But there are a few things left to do before we try turning the PC on.
  • There are a variety of things that you can do with a CD Drive DVD drive or better, from burning CD’s, to Ripping DVD’s and playing CD’s and DVD’s.
  • Also, don’t build on carpet and avoid wearing socks or loose fitting clothing.
  • However for a place without such a setup you do need a hard drive.

Otherwise, on older cases you’ll have to slip in the power supply in through the inside of the chassis and push it firmly against the inside wall as you attach it with four screws. You should then take your processor and match the golden triangle on the corner of the Ryzen processor with the triangle on the socket. Once the pins on the bottom of the processor lineup with the holes on the socket, drop it into place. Give it a little nudge to make sure it’s secure, then lower the retention arm back down and lock it into place. Then it’s a simply case of securing the motherboard down with the screws that came with your chassis. Make sure you use the right ones here, as you don’t want to thread the standoffs, in case you need to remove it at a later date.

Intel 11th Gen I9 Custom Pc Builder

Secure the graphics card with the required screws to the back of the chassis. Make sure the screws are tightened properly, and the pressure applied at the corners is even to avoid CPU damage and cooling performance degradation. Although building a PC is as easy as putting together a LEGO set, you should know about the building blocks before starting. PC builds can have many styles and uses, but some components are fundamental and must be a part of every PC. We choose any combination of components we want to fit our requirements.

Once you’re finally logged on, head on over to the manufacturer’s website, find your motherboard, head to service, and download the correct chipset drivers for your system. Bring the system back to your computer space, where it’ll sit forever – or at least until your next upgrade – as we’ll want to install the operating system next. Luckily, if you’re on more of a budget, you can get something like an Intel Core i K and an Nvidia GeForce RTX 3060 , and have an incredible 1080p gaming machine. And, that will be able to get some video editing done on the side too. These days, basically everyone needs a decent PC to get through life, but they come in so many shapes and sizes that it’s important to know what you’re trying to build before you even get started. “A guide that talks about everything from budget to assembly, with countless useful tips & warnings.”

SSDs use NAND-based flash memory — similar to, but faster and more reliable than the flash memory used in a USB flash drive — to store data. In lieu of a mechanical arm, they use integrated processors to access stored data, making them much faster and less prone to mechanical failure than HDDs. The speed and convenience of SSDs come at a cost, however; SSDs are more expensive per gigabyte than HDDs. All case sizes are available at different price points, so finding a case that fits your budget shouldn’t be difficult.

Step 4: Hard Drives

The first is a high-end rig powerful enough for bleeding-edge gaming performance, and the other is a more affordable $1000 build that will run most games at decent settings. Before we get to the actual building portion, we need to talk about finding and buying the parts for your PC. Gaming PCs can cost as little as $500, or as much as several thousand dollars to build. Obviously, more expensive parts usually mean more power, but shopping for a build that fits your budget is often the biggest obstacle for first-time builders. There are several components that you need, each with a plethora of models, specs, and compatibility requirements to consider. I personally hook up the psu to the board and (if it’s a new board ,plug in your usb drive with updated bios you downloaded prior to all of this ) and I flash the bios.

When you’re done installing the motherboard with the CPU mount backplate, it’s time to install the cooler on the CPU. Keep in mind that most CPU coolers have pre-applied thermal paste. If yours doesn’t, add a small blob of thermal paste, ideally, around the size of a pea, on the center of the CPU. This will then spread out evenly as you mount the cooler in place.

Its job is to execute instructions for software running on your computer. The main brands for CPUs are Intel and AMD, and choosing one comes down to which one fits your needs and budget. Intel and AMD products aren’t interchangeable, as they use different sockets to connect with the motherboard.

Use motherboard manual as each motherboard has a different arrangement of pins on their front panel header . Double check your positives and negatives on LED connections. Line up the connectors with the gaps in the I/O panel and push the connectors into the panel before lowering it all the way onto the standoffs. You may need to apply some pressure in the direction of the back of the case to line up the screw holes with the standoffs – this is normal. Install the CPU cooler.If you are using an Intel/AMD stock cooler remove it from the packaging and place the pins in the corners through the holes surrounding the CPU socket . After this, turn the top of the pins in the opposite direction to that shown by the arrows to lock it in place.

Make sure you avoid bottlenecks, where one component can’t reach its full potential because another part is too slow. There will be a few reputable brands mentioned in each category, but we recommend reading up on when brand really matters (and when it doesn’t) so you don’t fall into advertising trap. Check your PSU has enough connectors, some motherboards have dual ATX 8pin or an 8 plus 4 design for CPU power, so choose one with dual ATX 8pin for future upgrade-ability, as most older models don’t. Also your graphics cards will need dual, even triple 6+2 PCI power connectors, but most PSUs have this.

Share this Post