Help Build My Perfect Pc how to build a computer

Jimmy/ January 15, 2023/ how to build a computer

We definitely recommend coming up with a budget before you start picking components (it’s easy for component shopping to get out of hand). Remember, you can always upgrade individual components later. Though building a PC can seem intimidating, you might find that it’s easier than you think, especially when broken into manageable steps.

  • Hard drives use small mechanical moving parts and spinning platters to do this, and SSDs use NAND flash technology.
  • Sure, then cough up (~$100 to $200) more for an extended warranty.
  • Of course, you can reference your manuals, go to the website for the part in question, search forums, etc.
  • Sometimes you may not be able to fit your screwdriver where it needs to be if other parts like the CPU cooler or RAM get in the way.
  • Our general rule of thumb is to install as many parts as possible before screwing it into your case.

Don’t forget to always check the dimensions of the graphics card before purchasing so you can evaluate and see whether or not it’ll fit just right inside the case. In particular, some of the high-end GPUs have large, dedicated coolers that can make it hard to squeeze into cases, even the standard ATX Full-tower cases. Before we get to install one of the best motherboards, you’ll want to check on a few things about your PC case. Check for pre-installed motherboard standoffs, ensure the number and arrangement of them conforms to the holes found on your motherboard. So, it’s a time consuming process for sure and it will take a good amount of work, but it’s an amazing undertaking that will fill you with a real sense of achievement at the end of it.

Graphic Card Gpu Installation

Manage the cables.Now things get more fiddly as we begin cabling. First sort out front panel connections before moving on to installing the power supply within the case to keep clutter to a minimum. Press back the clip at the edge of the slot similarly to the RAM slots ready for you to insert the graphics card. Lower the card into position and push down evenly at both ends until the clip engages. When it comes to the card manufacturers themselves, you have a few to choose from. Look for brands with good cooling and good customer support—XFX and EVGA both have pretty fantastic warranties on most of their cards, which is why they’re two of the most popular manufacturers around.

The speed discrepancy comes from how the two storage devices read and write data – read and write speeds measure how fast data loads and saves/transfers . Hard drives use small mechanical moving parts and spinning platters to do this, and SSDs use NAND flash technology. The difference results in better speed, efficiency, and durability because small mechanical parts and spinning platters are much more susceptible to physical damage than NAND.

If everything is showing up, now is also a good time to enable the XMP for Intel or DOCP for AMD to make sure your memory is operating at the correct frequency. As for your workspace, you’re going to want to clear off a good bit of table space, as you’ll likely be flipping your PC on its side, feet, back and any which way to install everything. “A general guide that provided enough information to know where to start and avoid most potential problems.” You can use zip ties to carefully bundle all of the cables and then route them to prevent them from blocking the airflow. Attach your RAM to the motherboard by finding the RAM slots and inserting the RAM appropriately .

Use as many screws as the chassis manual recommends, but if you don’t have enough screws most drives will be fine with just two screws. Storage generally comes in two sizes, 2.5-inch and 3.5-inch . Most 3.5-inch bays can accept 2.5-inch drives, but not vice versa (some 3.5-inch bays will have trays that aren’t designed for 2.5-inch drives, but they can still fit 2.5-inch bays). You may also see larger bays in your case — these are for larger drives such as optical drives and are usually located in the front of the case, near the top. There are two main connections — an 8-pin CPU connector toward the top of the board and a 24-pin connector from the side.

Smaller Micro-ATX or Mini-ATX may fit, check the case specs, or consider a smaller case to match. Third, you’ll need to check the length of the GPU the case accepts, as newer graphics cards can reach 27, 30 or almost 33 centimeters in length. Whether we’re talking hard disk drives, solid state drives or SSDs, or NVMe or SATA m.2 drives, these are all forms of storage for files in your computer. Storage has evolved from hard drives that use magnetic technology to store data on spinning disks. Reaching 20 terabytes or more, 4 to 8 terabyte hard drives are a cost-effective option for mass storage. But, with data transfer around 140 to 180 megabytes a second, speed is far surpassed by SSDs and m.2 drives.

Step By Step

Then, line up the notch in the RAM with the notch in the RAM slot and place the RAM inside the slot, pressing down on both sides until both sides make an audible click into place. We recommend going with a DDR4 module for now since DDR5 is still in its infancy. That being said, we have individual collections for both the best DDR4 memory and the best DDR5 memory, so be sure to check them out to see which one suits you best. Gaming computers are built to be really fast so the end users can play games like WOW on. There are many how to build computers instructables and guides out there, but they all tell you to get certain parts.

They may have little plastic switches, in which case they are tool-free bays, or they may just look like metal brackets. Every case is a little different when it comes to drive bays. Attach the PSU to the case using the four screws that came with the PSU. These platters use magnetic material to store data, which is subsequently retrieved with the use of a mechanical arm. Let’s take a look at what each component does, why it’s necessary, and what you need to look for while shopping around.

Why Should I Learn To Build A Computer?

You should now be able to tell if any of your components are dead or otherwise malfunctioning. If your motherboard is blinking lights or beeping at you, it’s probably trying to tell you something. Some motherboards have a post code display to help you identify what the problem is. To figure out what it’s trying to tell you, consult your user manual. If your motherboard has no post code display, connect a display to the GPU and see if your system “posts” or starts up and displays the motherboard’s logo. If you want to install an M.2 SSD, now is a good time to do so.

Share this Post