How To Build A Pc Guide For Beginners #yeswebuild how to build a computer

Jimmy/ October 8, 2021/ how to build a computer

Before we move on to the last step of physically building your PC, you may want to do some cable management to clean up. This’ll create some room for air circulation and accessing your components if you ever want to upgrade later. Most cases come with Velcro straps or zip ties, but I always keep a bag of Velcros on hand just in case.

SCSI is a set of standards for physically connecting and transferring data between computers and peripheral devices. The SCSI standards define commands, protocols, and electrical and optical interfaces. SCSI is most commonly used for hard disks and tape drives, but it can connect a wide range of other devices, including scanners and CD drives.

Processor/CPU – The Central Processing Unit is the “brain” of the computer. No, but using a graphics card can significantly enhance your experience. If you don’t have a graphics card, you can still play Minecraft using a normal monitor, a computer mouse and a keyboard. Sorting out and connecting Power CableFirst take all the connectors straight through the large cutout in the case to the rear of the motherboard tray and pull through all the excess.

Part 1part 1 Of 3:determining Your Needs Download Article

This is another step where you’ll want to reference your motherboard’s manual, which should be able to tell you which order to place the RAM in. Placing your RAM apart like this will help you get the most out of your CPU. First off, be sure to flip down the plastic clips on both sides of each slot you plan on using. Inserting the RAM requires more force, but make sure you start small and then ramp up your pressure gradually. This should cause the plastic clips to flip up, gripping your RAM.

  • You’ll want to refer to your specific case’s manual for this, but it’s pretty straightforward.
  • Press the power button on your PC, and if it turns on, you’re almost good to go.
  • Nowadays, many computers are equipped with RGB lighting devices.
  • You’ll likely find that it’s easier to work with a bigger case and will have a smoother time upgrading your PC in the future.

The case we went with, Fractal’s Meshify C, includes an awesome area for cable management that’s equipped with a series of Velcro straps. We were able to slide all of our cables into this space and keep it all fastened up nicely. Assembling the motherboard outside of the case will make your whole experience much easier to deal with. Our general rule of thumb is to install as many parts as possible before screwing it into your case. Also, keep in mind that certain parts will require some force when plugging them in, while others simply just need to be placed into their respective spots. Please pay close attention to the following instructions before installing your components.

Case, Fans, And Power Supply

Those are two basics, but not the only ones, and you don’t want to rely on them alone. It’s recommended to look at benchmarks for the processors you’re interested in, to get an idea of how they compare. As for the motherboard options, we recommend buying something that offers potential room for future upgrades too.

If everything’s properly connected, your computer should start up. Aftermarket heat sinks may have brackets that need to be attached underneath the motherboard. Cases might obstruct air flow causing some higher-end components with larger power draw to overheat. This wikiHow teaches you how to build a desktop computer using custom parts.

Share this Post