How To Build A Pc Guide For Beginners #yeswebuild how to build a computer

Jimmy/ December 27, 2021/ how to build a computer

The first step is to release the tension lever on the CPU socket so you can drop the processor into it. You need to line up the arrow/triangle on the top of the CPU with the one on the socket or its cover. This is a crucial step and you may end up damaging either your chip, the board, or both if you don’t pay attention.

Typically you want two fans in the front drawing air in and at least one in the rear blowing air out. You could also screw one or two more optional fans into the roof of the PC case for additional exhaust, if your PC case has mounting points for them. Zip ties are useful for tidying up all your PC cables and luckily, you most likely won’t have to buy them as they often come included with several different types of computer parts. You’ll also need a pair of side cutters to cut those said zip ties.

  • This data is held on either a hard disk drive or solid state drive .
  • This is a huge price difference, and one that generally varies based on smart shopping and customizing the computer to fit your needs.
  • If it has a power connector, connect it to a 4-pin molex connector.
  • Along your motherboard, you will have a lot of different pins and ports and what have you.
  • First take a look at your motherboard and locate the PCIe slot closest to your processor.

Monitors, keyboards, mice, headphones, and other peripherals mostly come down to personal preference. You don’t need to purchase these items with your components, but you will need a display, a keyboard, and a mouse to set up your system after you build it. Liquid cooling uses a liquid coolant to soak up heat from components and move it to an area that’s less restricted . Liquid cooling is less dependent on airflow inside the chassis, and therefore more efficient at cooling specific components. This is the cheapest option, but you’ll need to find a place to store all the cables that you know you’re not going to use.

Infinity X119 Gaming Pc

In other cases you might need to mount your own case fans, or you may even choose to run your computer without any case fans at all. Lower the CPU socket cover over the CPU and lower the latch lever closed again to secure the CPU socket holder closedDon’t apply force to seat the CPU. Avoid touching of pressing down on the back of the CPU with your fingers, as any residue from your hands can destroy the heat transfer surface for the cooler which will be mounted next. However, if you’re new we suggest following a build guide until you get an idea of your personal preferences when it comes to build order.

how to build a computer

See the motherboard manual if you can’t find their location. Push down the retention bracket arm and hook it back under the latch where it was originally. If you are unsure you can watch detailed video guides to check that you are doing the right thing and applying a normal amount of force. All CPUs have an arrow in one corner corresponding to an arrow printed on or around a corner of the motherboard CPU socket to indicate which way round it fits. The text on the CPU is also an indication of the ‘right way up’. In addition to this, Intel CPUs also have notched sides on the upper left and right edges which match up with the shape of the socket.

To install the RAM modules, first push on the levers on either side of the DIMM socket, so that they move to the sides. RAM – Random Access Memory is the “short-term memory” of a computer. It is used by the CPU to store program instructions and data upon which it is currently operating. Install the power supply.Next we will be inserting the power supply. This simply slides into place above/underneath the motherboard – depending on case design – and will sit against the back of the case. Which way up you place the fan depends on your case and the airflow.

This supplies the fan with power which is required for it to operate. There a few different sizes (also known as ‘form factors’) of motherboard commonly available, so most cases have screw positions that will accommodate the various sizes of motherboard. You don’t need to install mounting standoffs in all of them; just the ones that match your motherboard will be fine. Video Card/Graphics Card/GPU – While the CPU handles most computation, the Graphics Processing Unit handles all computing related to visuals.

Mounting The Cpu Cooler

The common thread with each of these scenarios is the hardware – the motherboard, processor , storage , and memory . Installing the CPU, and the CPU’s heat-sink and fan, are by far the most difficult steps you’ll have to complete during your build. During the process, if anything does not seem to fit or make sense, put the parts down and look things over carefully before you proceed. Some operations, especially installing the heat-sink/fan combination, can require pretty firm pressure, so don’t be afraid to push a little harder if you’re sure everything is set up correctly.

If you’re looking at Blu-Ray drives and Blu-Ray burners, though, pay attention to the read and write speeds. The higher the read speeds, the faster you can rip a Blu-Ray disc, and the faster the write speed on a burner, the faster you can burn a Blu-Ray disc. After unplugging the power supply from the motherboard, place your motherboard into the case and screw into place. Make sure your front panel connectors can be easily accessed and are completely visible through the IO shield. These steps will allow you to know whether the computer will boot correctly before you place it into the case.

Share this Post