How To Build Your Own Computer how to build a computer

Jimmy/ February 13, 2022/ how to build a computer

Install a graphics card .Next we can move on to the installation of the graphics card. Remove the PCIe blanking plates corresponding to the slot on the case you will be placing your graphics card in. Again, your motherboard manual will assist you in making a decision about which slot to use, but usually you should use the topmost PCIe x16 slot for your graphics card . Installing the graphics card is an optional step if you’re using an Intel or AMD CPU with integrated graphics.

My computer didn’t cost me anything to make, because i was able to get parts from family members, and scavenging. Get hands-on knowledge of PC building and learn how to build. A custom water cooling solutions places higher demands on skill, but is a good way to set your rig apart from others.

That’s why we’ve put together this comprehensive step-by-step guide to building your first gaming PC, complete with tips and tricks from our veteran builders. PC Builder is a tool that makes PC building easier than ever. You can choose from a range of components and check the compatibility with your system to build your perfect PC.

You’ll also have to install a CPU cooler for controlling the thermal output of the CPU. Many CPUs come with coolers in the box and they should be enough if you’re not doing any heavy overclocking. However, you can also buy aftermarket CPU coolers to get the best performance out of your CPU.

Step 11: Operating System

You should now be able to tell if any of your components are dead or otherwise malfunctioning. If your motherboard is blinking lights or beeping at you, it’s probably trying to tell you something. Some motherboards have a post code display to help you identify what the problem is. To figure out what it’s trying to tell you, consult your user manual. If your motherboard has no post code display, connect a display to the GPU and see if your system “posts” or starts up and displays the motherboard’s logo. If you want to install an M.2 SSD, now is a good time to do so.

  • After this tedious job is over you will be pleased to know that all the other cables are relatively simple.
  • Mini-ITX motherboards sport the smallest form factor of the four (6.7 by 6.7 inches) and often have two RAM slots.
  • Then, push the card straight down into the slot, and screw it in using the screw from the dust cover.
  • The most important thing to keep in mind when shopping for RAM is what your motherboard and processor can support.
  • You can also check out Intel’s other Alder Lake CPUs, but keep in mind that these new CPUs require a Z690-based platform to work.

Install the CPU.Take the motherboard out of its protective bag and place it on top of its box (a perfect non-conductive workspace which is the right size to fit the motherboard on). Removing the back panel of your case, you should find a slot at the bottom where the power supply will slide into place and screw in. First, screw in your standoff screws into the holes in the case where your motherboard will sit. This is to prevent the metal on the bottom of the motherboard from touching the metal case and ruining your motherboard. After that, plug the power supply into the wall and flip the switch to the straight line. Place all four pins of the heat sink inside the holes around the CPU and press down until all four pins look like the third image, with the black part completely clicked into place.

Availability Of Components

A few simple steps are all you need to make your gaming computer truly unique. You should pay attention to contrast and especially brightness, which is rated in candala or nits, same thing. Panel type can be In-Plane Switching or IPS, with better color accuracy and wider viewing angles, or Twisted Nematic or TN, known for its ultra-fast refresh rate.

Don’t forget to always check the dimensions of the graphics card before purchasing so you can evaluate and see whether or not it’ll fit just right inside the case. In particular, some of the high-end GPUs have large, dedicated coolers that can make it hard to squeeze into cases, even the standard ATX Full-tower cases. Before we get to install one of the best motherboards, you’ll want to check on a few things about your PC case. Check for pre-installed motherboard standoffs, ensure the number and arrangement of them conforms to the holes found on your motherboard. So, it’s a time consuming process for sure and it will take a good amount of work, but it’s an amazing undertaking that will fill you with a real sense of achievement at the end of it.

Share this Post